Blog

Quick Contact

24,000 lbs. of Pouched Candy Per Hour – A Partnership for Success

Smalley recently worked with Ferrara Candy Company, the product of the merger of Ferrara Pan Candy Co. and Farley’s & Sathers, to achieve an output of 24,000 lbs of pouched candy per hour.

Follow the link below to see how five of Smalley Manufacturing’s Storveyors are being used to pump out 400 lbs of pouched candy per minute:

Read More

PACK EXPO 2013 – Las Vegas, NV

Smalley Manufacturing just returned from PACK EXPO in Las Vegas, Nevada!

With more than 27,000 attendees present and over 1,700 exhibiting suppliers, PACK EXPO 2013 was a major success. We hope that you were able to stop by if you were in attendance. If you weren’t able to attend you missed out on a tremendous experience packed with machinery, technology, education, networking, and more.

Read More

Smalley’s Gentle Spiral Letdown System

Introducing the “NEW” Smalley tote fill unit specifically designed to fill totes efficiently while “LOWERING” the product “GENTLY” into the bin. The system incorporates a stainless steel holding bin mounted on a sturdy tubular construction platform. The product is then “GENTLY” and precisely conveyed from the bin via an electromagnetic feeder on to the constant velocity rotating spiral.

The spiral is specifically designed to maintain a constant conveying speed that will reduce degradation to the product.

Read More

Pack Expo – September 28-30, 2015

Smalley Manufacturing will be at Pack Expo in Las Vegas, NV at the Las Vegas Convention Center September 28th through the 30th. New and exciting things are always happening at Smalley Manufacturing, so be sure to make it a point to stop by and see us. Our booth number is C-3700.

Read More

Pack Expo 2014 – November 2-5, 2014

Smalley Manufacturing will be at Pack Expo in Chicago, IL at the McCormick Place November 2nd through the 5th. We are getting geared up for a great show, so make plans to stop by our booth, number N-5004.

Whether you already know Smalley or you are interested in learning more, we look forward to seeing you at the show!

Read More

4 Points to Consider When Designing a Conveyor System

One of the first steps that should be taken when designing a conveyor system is to define the product and all of its characteristics. Size, rate, density, and fragility of product are usually some of the first characteristics to be defined, but other attributes such as corrosiveness, tackiness, product temperature, and angle of repose are other key factors that need to be considered in order to design a successful conveying system.

Determine the environmental conditions

Read More

Smalley Manufacturing Company
P.O. Box 22788
Knoxville, TN 37933-0788
Phone: (865) 966-5866

© Copyright 2017 Smalley Manufacturing. All Rights Reserved

Website Designed by Firstview Online Marketing